Scientific Committee
Members:
Prof. Marta Starostka-Patyk, Faculty of Management, Czestochowa University of Technology, Poland
Prof. Vitale Cardone, Department of Civil Engineering, University of Salerno, Italy
Prof. Leonardo Cascini, Department of Civil Engineering, University of Salerno, Italy
Prof. Domenico Guida, Department of Industrial Engineering, University of Salerno, Italy
Prof. Joseph Quartieri, Department of Industrial Engineering, University of Salerno, Italy
Prof. Stefano Riemma, Department of Industrial Engineering, University of Salerno, Italy
Prof. Gianfranco Rizzo, Department of Industrial Engineering, University of Salerno, Italy
Prof. Mario Vento, Department of Information Engineering, Electrical Engineering and Applied Mathematics, University of Salerno, Italy
Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
Prof. Jiin-Yuh Jang, University Distinguished Professor, ASME Fellow, National Cheng-Kung University, Taiwan
Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
Prof. J. Quartieri, University of Salerno, Italy
Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
Prof. Ottavia Corbi, University of Naples Federico II, Italy
Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
Prof. Moran Wang, Tsinghua University, Beijing, China
Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
Prof. Thomas Panagopoulos, Faculty of Science and Technology, University of Algarve, 8005-139 Faro, Portugal
Prof. Jon Bryan Burley, Landscape Architecture Program, School of Planning, Design, and Construction, Michigan State University, Lansing, MI 48824, United States of America
Prof. Cyril Fleaurant, Institut Superieur des Sciences Agronomiques, Angers, France
Prof. Arch. Biagio Guccione, Architettura del Paesaggio, Universtita degli Studi di Firenze, Via Giambattista Lulli 85, 50144 Firenze, Italy
Prof. Jose Beltrao, Faculty of Engineering of Natural Resources, Department of Agronomy, University of Algarve, Faro, Portugal
Prof. Ioannis Ispikoudis, Landscape Ecology, Aristotle University, Thessaloniki, Greece
Prof, Bruce Sharky, Landscape Architecture, Louisiana State University - Baton Rouge, USA
Prof. Giuseppe Genon, Politecnico di Torino, Dipartimento di Scienza, Torino, Italy
Prof. Inga, Straupe, Latvia University of Agriculture, Latvia
Prof. Jose Luis Miralles, Universidade de Valencia, Valencia, Spain
Prof. Carlos Guerrero, University of Algarve, Faro, Portugal
Prof. Giuseppe Luigi Cirelli, Department of Agricultural Engineering - Hydraulic division, University of Catania, Catania, Italy
Prof. Francesco Ferrini, Universita di Firenze, Departamento di Ortofroricoltura, Firenze, Italy
Prof. Sarma Cakula, Dean of Faculty of Engineering, Vidzeme University of Applied Sciences, Latvia
Dr. Claudio Guarnaccia, Department of Industrial Engineering, University of Salerno, Italy