AUTHORS: Mohammed Taoussi, Mohammed Karim, Badre Bossoufi, Dalila Hammoumi, Chakib El Bakkali, Aziz Derouich, Najib El Ouanjli

Download as PDF

ABSTRACT: In the propose of the work, we concerns the elaboration an efficient and robust control of active and reactive power by the use the PI regulators control (FOC) a power converters directly connected to the stator and the rotor of a Doubly Fed Induction Generator (DFIG) system incorporated in a wind turbine to improve the performance of a speed wind turbine. In the aim to assess the performance and dynamics of the wind system, for the different test speeds of the wind, we are interested in the modeling, development and control of the wind system. Initially, a control strategy of the MPPT-DFIG is presented. Therefore, the aim is the study and implementation of the new control technique for wind systems. This control technique is based on the orientation control of the flow rotor to DFIG. Finally, the control simulation results are simulated on the environment Matlab / Simulink. A very detailed analysis of simulation results of wind conversion chain system is performed with the objective to evaluate and optimize the performance of the proposed system.

KEYWORDS: Wind Turbine; DFIG-Generator; modeling; Rotor Control; vector control; MPPT Control; Orientation of the flow rotorique; Matlab / Simulink.

REFERENCES:

[1] M.Taoussi, M.Karim, B.Bossoufi, A.Lagrioui, M.El Mahfoud, «The Fuzzy Control for Rotor Flux Orientation of the double-fed asynchronous generator Drive», International Journal of Computers & Technology, Mai 2013.

[2] M.Taoussi, M.Karim, B.Bossoufi, D. Hammoumi, A.Lagrioui,” Speed Backstepping control of the double-fed induction machine drive”, Journal of Theoretical & Applied Information Technology, Vol 74 Issue 2, pp 189-199 , april 2015.

[3] B.Bossoufi, M.Karim, A.Lagrioui, M.Taoussi, A.Derouich “Modeling and Backstepping Control of DFIG Generators for Wide-Range Variable-speed Wind Turbines” Journal of Electrical Systems JES, pp317-330. Vol.10 No.3, September 2014.

[4] B.Bossoufi, M.Karim, A.Lagrioui, M.Taoussi, M.L.EL Hafyani “Backstepping control of DFIG Generators for Wide-Range VariableSpeed Wind Turbines ” IJAAC International Journal of Automation and Control , Vol.8 No.2, pp 122-140, July 2014.

[5] B.Bossoufi, M.Karim, A.Lagrioui, M.Taoussi, “FPGA-Based Implementation nonlinear backstepping control of a PMSM Drive”IJPEDS International Journal of Power Electronics and Drive System, Vol.4 No.1, pp 12-23, March 2014.

[6] B.Bossoufi, M.Karim, A.Lagrioui, “Matlab & Simulink Simulation with FPGA-Based Implementation adaptative and not adaptative Backstepping nonlinear Control of a Permanent Magnet Synchronous Machine Drive” WSEAS TRANSACTIONS on SYSTEMS and CONTROL, pp86-100, Vol.9 No.1, February 2014.

[7] B.Bossoufi, M.Karim, S.Ionita, A.Lagrioui, “Nonlinear Non Adaptive Backstepping with Sliding-Mode Torque Control Approach for PMSM Motor” Journal of Journal of Electrical Systems JES, pp236-248. Vol.8 No.2, June 2012.

[8] B.Bossoufi, M.Karim, S.Ionita, A.Lagrioui, “Low-Speed Sensorless Control of PMSM Motor drive Using a NONLINEAR Approach BACKSTEPPING Control: FPGA-Based Implementation” Journal of Theoretical and Applied Information Technology JATIT, pp154- 166, Vol. 36 No.1, 29th February 2012.

[9] B.Bossoufi, M.Karim, S.Ionita, A.Lagrioui, “DTC CONTROL BASED ARTIFICIAL NEURAL NETWORK FOR HIGH PERFORMANCE PMSM DRIVE” Journal of Theoretical and Applied Information Technology JATIT, pp165-176, Vol. 33 No.2, 30th November 2011.

[10] B.Bossoufi, M.Karim, S.Ionita, A.Lagrioui, “The Optimal Direct Torque Control of a PMSM drive: FPGA-Based Implementation with Matlab & Simulink Simulation” Journal of Theoretical and Applied Information Technology JATIT, pp63-72, Vol. 28 No.2, 30th June 2011.

[11] Karim Belmokhtar, Mamadou Lamine Doumbia, “Modélisation et commande d’un système éolien à base de machine asynchrone à double alimentation pour la fourniture de puissances au réseau électrique” Journal of Scientific Research, Vol. 2, No 0, pp 54-62 , Nouembre 2010.

[12] W. L. Kling and J. G. Slootweg, “Wind Turbines as Power Plants”. in Proceeding of the IEEE/Cigré workshop on Wind Power and the impacts on Power Systems, pp 17-18 June 2002, Oslo, Norway.

[13] J. J. Chen and K. P. Chin, 'Automatic fluxweakening control of permanent magnet synchronous motors using a reduced-order controller,' IEEE Trans. Power Electron, vol. 15, pp. 881-890, Sept. 2000.

[14] M. Rodic, K. Jezernik, “Speed Sensoless Sliding Mode Torque Control of Induction Motor “, IEEE Trans on. Industrial Electronics, February 2002.

[15] Hisn-Jang Shieh and Kuo-Kai Shyu, “Non Linear Sliding Mode Torque Control With Adaptive Backstepping Approach For Induction Motor Drive”, IEEE Transactions on Industrial Electronics, Vol. 46, N° 2, April 1999, pp. 380- 388.

[16] Z. P. Jiang and H. Nijmeijer, “Tracking control of mobile robots: A case study in Backstepping,” Automatica, vol. 33, no. 7, pp. 1393–1399, Jul. 1997.

[17] T. C. Lee, K. T. Song, C. H. Lee, and C. C. Teng, “Tracking control of unicycle-modeled mobile robots using a saturation feedback controller,” IEEE Trans. Control Syst. Technol., vol. 9, no. 2, pp. 305–318, Mar. 2001.

[18] T. H. Li, S. J. Chang, and Y. X. Chen, “Implementation of humanlike driving skills by autonomous fuzzy behavior control on an FPGA based car-like mobile robot,” IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 867–880, Oct. 2003.

[19] S. S. Solano, A. J. Cabrera, I. Baturone, F. J. Moreno-Velo, and M. Brox, “FPGA implementation of embedded fuzzy controllers for robotic applications,” IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1937– 1945, Aug. 2007.

[20] Y. F. Chan, M. Moallem, and W. Wang, “Design and implementation of modular FPGAbased PID controllers,” IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1898–1906, Aug. 2007.

[21] S. H. Han, M. H. Lee, and R. R. Mohler, “Realtime implementation of a robust adaptive controller for a robotic manipulator based on digital signal processors,” IEEE Trans. Syst., Man, Cybern. A, Syst., Humans, vol. 29, no. 2, pp. 194–204, Mar. 1999.

[22] D. Zhang and H. Li, “A stochastic-based FPGA controller for an induction motor drive with integrated neural network algorithms,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 551– 561, Feb. 2008.

[23] C. F. Jung and C. H. Hsu, “Temperature control by chip implemented adaptive recurrent fuzzy controller designed by evolutionary algorithm” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 11, pp. 2376–2384, Nov. 2005.

[24] C. F. Jung and J. S. Chen, “Water bath temperature control by a recurrent fuzzy controller and its FPGA implementation,” IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 941– 949, Jun. 2006.