WSEAS Transactions on Systems


Print ISSN: 1109-2777
E-ISSN: 2224-2678

Volume 17, 2018

Notice: As of 2014 and for the forthcoming years, the publication frequency/periodicity of WSEAS Journals is adapted to the 'continuously updated' model. What this means is that instead of being separated into issues, new papers will be added on a continuous basis, allowing a more regular flow and shorter publication times. The papers will appear in reverse order, therefore the most recent one will be on top.


Volume 17, 2018



First Sliding Mode Control of a DFIG-based Wind Turbine with Mechanical Part Control

AUTHORS: Larbi Djilali, Oscar J. Suarez, Aldo Pardo Garcia, Mohammed Belkheiri

Download as PDF

ABSTRACT: The objective of this article is the study of the dynamic behavior of a wind turbine based on doubly fed induction generator (DFIG) with Maximum Power Point Tracking (MPPT) without enslavement of speed and PITCH control. The DFIG stator is directly connected to the grid however; the rotor is linked via a power electronic converter (rectifier, filter, and inverter). The stator active and reactive powers are controlled directly by adjusting the DFIG rotor quantities, while applying direct vector control based on a first order sliding mode controller (SMC).

KEYWORDS: Wind turbine, MPPT, PITCH, DFIG, active and reactive power, sliding mode

REFERENCES:

[1] Belmokhtar K., Doumbia L. and Agbossou K. “Modelling and control of a wind energy system down to supply power to the DFIM grid” (French) , 4th International Conference on Electrical Engineering, CIGE’10. University of Bechar, Algeria. 03-04 November 2010.

[2] Beltran B. “Contribution to the robust control of wind turbines based on DFIG: the classic sliding mode and higher order sliding mode” (French). PhD thesis, University of Western Brittany, 2010.

[3] Bianchi FD., De Battista H. and Mantz RJ. “Wind turbine control systems: principles, modelling and gain scheduling design”. Springer, London. 2007.

[4] Beltran B., Benbouzid MEH. and Ahmed-Ali T. “High-order sliding mode control of a DFIG-based wind turbine for power maximization and grid fault tolerance”. In: Proceedings of IEEE IEMDC. Miami, USA. 2009.

[5] Bouhedda A. “Contribution to the study of a wind turbine control systems” (French). PhD thesis, University of Mouloud Mammeri. Tizi-Ouzou, Algeria, 2011.

[6] Poitiers F. “Study and Control of asynchronous generators for the use in wind power” (French). PhD thesis, Polytechnic School of Nantes, France, 2003.

[7] Cardenas R., Pena R., Alepuz S. and Asher G. “Overview of control systems for the operation of DFIGs in wind energy aplications”. IEEE Trans Ind Electron, pp 2776-2798. 2013

[8] Itaso Martinez M., Susperregui A., Tapia G. and Camblong H. “Sliding-Mode Control for a DFIGbased Wind Turbine under Unbalanced Voltage”. Preprints of the 18th IFAC Word Congress Milano (Italy). 2011.

[9] Hamdi N. “Modeling and control of wind power generators” (French). Magister thesis in Electrical Engineering, University of Mentouri, Algeria, 2008.

[10] Djeriri L. “Vector control of a DFIM integrated in wind system” (French). PhD thesis, University of Djilali Liabes of Sidi-Bel-Abbes, Algeria, 2008.

[11] Gaillard A. “Wind turbine system based on a DFIM: Contribution to the study of the quality of electric power and continuity Service” (French). PhD thesis, University of Henri Poincare Nancy I, France, 2010.

[12] Djilali L. “FOC Comparative study of a wind power system a basis of DFIG with and without control of the mechanical part” (French). 2nd International Conference on electronics, electrical and automatic. Oran, Algeria, 26-27 November 2013.

[13] Mejía D., Torres I., and Diaz J. “MPPT control systems used in sunflower for maximum efficiency”. Revista Colombiana de Tecnologías de Avanzada, pp. 118-123.

[14] Giménez M. “Develop advance in new strategies for electric machine control base on DTC (Direct Torque Control)”. Revista Colombiana de Tecnologías de Avanzada, pp. 27-36. ISSN: 1692- 7257-Vol. 1.2007.

[15] Bachtarzi A. “Control of variable structure systems Applications to a steam generator” (French), PhD thesis, University of Constantine, Algeria. 2011.

[16] Beltran B., Benbouzid MEH. and Ahmed-Ali T. “DFIG-based wind turbine robust control using high-order sliding modes and a high gain observer”. HAL archives-ouvertes. International Review on Modelling and Simulations, pp. 1148-1155. 2011.

[17] Bermeo W., Souza Jr A., Fernandes T., Honórico D., Nogueira L., and Barreto L. “Sliding model control applied in current loop for a DSPbased position control applied to squirrel-cage induction motor”. Revista Colombiana de Tecnologías de Avanzada, pp. 26-32. ISSN: 1692- 7257-Vol. 1.2016.

[18] Utkin V., Guldner J. and Shi J. “Sliding Mode Control in Electromechanical Systems”. Taylor&Francis, London, UK. 1999.

[19] Álvarez R., García M., and Torregoza A. “Photovoltaic module-integrated converter (mic) based on semi-z-source inverters (szsi): a new sliding mode control scheme”. Revista Colombiana de Tecnologías de Avanzada, pp. 61-66. ISSN: 1692- 7257-Vol. 1.2014.

WSEAS Transactions on Systems, ISSN / E-ISSN: 1109-2777 / 2224-2678, Volume 17, 2018, Art. #8, pp. 71-78


Copyright © 2018 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution License 4.0

Bulletin Board

Currently:

The editorial board is accepting papers.


WSEAS Main Site