AUTHORS: Slavomir Kascak, Michal Prazenica, Miriam Jarabicova, Roman Konarik
Download as PDF
ABSTRACT: This paper deals with an analysis of four phase interleaved DC-DC converter for higher power application in continuous conduction mode. The interleaved topology is widely used due to their advantage as lower input current ripple which means volume reduction of input capacitor. The current ripple equations of an input current for the boost operation mode and the ripple current in individual phases of the interleaved converter using uncoupled inductor are shown. The theoretical equations are supplemented by the simulation results using Spice simulator and by measurement on the interleaved converter.
KEYWORDS: Interleaved boost converter, uncoupled inductor, simulation, measurement.
REFERENCES:
[1] TI, Power Tips: When to choose multiphase, https://e2e.ti.com/blogs_/b/powerhouse/archive /2013/10/31/powerlab-notes-when-to-choosemultiphase.
[2] Bodo´s Power Systems, Multiphase Buck Converters, http://www.powerguru.org/multiphase-buckconverters.
[3] Ovcarcik, R. Spanik, P., Pavlanin, R., DC/DC converters used for a high input voltage based on a half-bridge topology, 6-th European Conference of TRANSCOM, Žilina, ISBN 80- 8070-417-1, pp. 57-62, 2005.
[4] Somkun, S., Sirisamphanwong, Ch., Sukchai, S., A DSP-based interleaved boost DC–DC converter for fuel cell applications, International Journal of Hydrogen Energy, Vol. 40, Iss. 19, pp 6391-6404, May 2015.
[5] Sundari, N., Jeba, D., Ramalakshmi, R. Rajasekaran, R., A Performance Comparison of Interleaved Boost Converter and Conventional Boost Converter for Renewable Energy Application, International Conference on Green High Performance Computing, IEEE, 2013, pp. 6, 2013.
[6] Lazic, M., Zivanov, N., Sasic, B., Design of Mutiphase Boost Converter for Hybrid Fuel Cell/Battery Power Sources, Paths to Sustainable Energy, INTECH, pp. 359-404, 2010.
[7] ON Semiconductor, Interleaved PFC.
[8] O’Loughlin, M., An Interleaving PFC PreRegulator for High-Power Converters, Texas Instruments.
[9] Musavi, F., Eberle, W., Dunford, W. G., A High-Performance Single-Phase Bridgeless Interleaved PFC Converter for Plug-in Hybrid Electric Vehicle Battery Chargers, IEEE Transaction on Industry Applications, Vol. 47, No. 4, 2011.
[10] Wong, P.L., Xu, P., Yang, B., Lee, F.C., Performance Improvements of Interleaving VRMs with Coupling Inductors, IEEE Transaction on Power Electronics, Vol. 16, NO. 4, 2001.
[11] Cubon, P., Radvan, R.. Evaluation of Propulsion System of the Electric Go-kart, 17th International Student Scientific Conference on Electrical Engineering, POSTER, Prague, ISBN 978-80-01-05242-6, May 2013
[12] Mazgut, R., Cubon, P., Radvan, R., Possibilities optimizing energy consumption of electric vehicle, 19th International Student Scientific Conference on Electrical Engineering, POSTER, Prague, ISBN 978-80- 01-05728-5, 2013
[13] Shin, H. B., Park, J. G., Chung, S. K., Lee, H. W., Generalized Steady-state Analysis of Multiphase Interleaved Boost Converter with Coupled Inductors, IEE Proc.-Electr. Power Appl., Vol. 152, No. 3, 2005.
[14] Ikriannikov, A., The Benefits of the Coupled Inductor Technology, Maxim Integrated, Tutorial.
[15] Imaoka, J., Yamamoto, M., Kawashima, T., High-power-density three-phase interleaved boost converter with a novel coupled inductor, IEEJ Journal of Industry Applications, Vol. 1, No. 1, pp. 20-3.
[16] Frivaldsky, M., Hanko, B., Prazenica, M., Morgos, J., High Gain Boost Interleaved Converters with Coupled Inductors and with Demagnetizing Circuits, Energies, 11(1), 130, 2018.
[17] Zdanowskim M., Rabkowski, J., Barlik, R., Highly-Efficient and Compact 6 kW/4x125 kHz Interleaved DC-DC Boost Converter with SiC Devices and Low-Capacitive Inductors, Energies, 10, 363, 2017