WSEAS Transactions on Business and Economics


Print ISSN: 1109-9526
E-ISSN: 2224-2899

Volume 14, 2017

Notice: As of 2014 and for the forthcoming years, the publication frequency/periodicity of WSEAS Journals is adapted to the 'continuously updated' model. What this means is that instead of being separated into issues, new papers will be added on a continuous basis, allowing a more regular flow and shorter publication times. The papers will appear in reverse order, therefore the most recent one will be on top.

Volume 14, 2017


Correlation of the Prediction Curve of the Creep Behaviour of Polymeric Materials

AUTHORS: Lenka Hylova, Martin Reznicek, Martin Ovsik, Vaclav Janostik

Download as PDF

ABSTRACT: This study deals with the study corellation of regression curve parameters on the prediction of possibilities of measured data. In this study, the necessary introduction of polymeric materials and their material structure, which influences their physical and mechanical properties is described. Thereafter, the method of testing materials using the DMA device which enables this measurement is presented. In the next section, these measured data are processed by a creep module in which the regression curve methods and their match with the measured data are applied. In the final part of the thesis is evaluated the conformity of the measured data with the data obtained from the regression curve.

KEYWORDS: creep, polymer, regression, prediction, long test

REFERENCES:

[1] Sefidmazgi NR, Bahia HU. Mechanisms of failure in uniaxial repeated creep test and the relationship to aggregate packing. RILEM Bookseries ,11:757-71, (2016).

[2] Ren, W., Zhang, D., Wang, G. and CHeng, H. Mechanical and thermal properties of bamboo pulp fiber reinforced polyethylene composites. BioResources, 11, pp. 4117-4127, (2014).

[3] Ge H, Le J-, Mantell SC. Numerical modeling of stress corrosion cracking of polymers. Eng Fract Mech , 160:199-212, (2016).

[4] E. Morales, J.R. White, J. Mater. Sci., 44 (17) (2009), pp. 4734–4742

[5] Ge, H., Li, H., Mantell, S.C.,Annual technical conference - ANTEC, conference proceedings, 2, 1281 - 1286p., (2014).

[6] Apollonio C, Covas DIC, de Marinis G, Leopardi A, Ramos HM. Creep functions for transients in HDPE pipes. Urban Water J, 11,:160-6,( 2014).

[7] M. Ovsik, D. Manas, M. Manas, M. Stanek, M. Hribova, K. Kocman, D. Samek, Chem. listy, 106 (2012)

[8] A. Lalande, D. Gardette Nucl. Instrum. Methods Phys. Res. B, 222 (2004)

[9] D. Manas, M. Manas, M. Stanek, M. Danek, Arch. Mater. Sci. Eng., 32 (2) (2008)

[10] J.G. Drobny, CRC Press, (2003).

[11] O. N. Tretinikov, S. Ogata, Y. Ikada, Polymer 39,24 (1998).

[12] G. Zamfirova, V. Gaydarov, T. Zaharescu, L. G. Silva, Chemicke Listy 104 (2010).

[13] W.C. Oliver, G.M. Pharr, J. Mater. Res., 19. (2004).

[14] D. Manas, M. Hribova, M. Manas, M. Ovsik, Stanek, Thin Solid Films 530 (2013).

[15] G. M. Pharr, Materials Science and Engineering (1998).

WSEAS Transactions on Business and Economics, ISSN / E-ISSN: 1109-9526 / 2224-2899, Volume 14, 2017, Art. #40, pp. 391-396


Copyright © 2017 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution License 4.0